Release14 Makefile

From DLXS Documentation

Main Page > Mounting Collections: Class-specific Steps > Mounting a Finding Aids Collection > Preparing Data and Directories > Release14 Makefile

#$Id: Makefile,v 1.24 2008/07/31 20:51:14 tburtonw Exp $#
DLXSROOT = /l1
NAMEPREFIX = samplefa
FIRSTLETTERSUBDIR = s
# --------------------------------------------------
OBJDIR = $(DLXSROOT)/obj/$(FIRSTLETTERSUBDIR)/$(NAMEPREFIX)/
IDXDIR = $(DLXSROOT)/idx/$(FIRSTLETTERSUBDIR)/$(NAMEPREFIX)/
PREPDIR = $(DLXSROOT)/prep/$(FIRSTLETTERSUBDIR)/$(NAMEPREFIX)/
DATADIR = $(DLXSROOT)/prep/$(FIRSTLETTERSUBDIR)/$(NAMEPREFIX)/data/

COLLBINDIR = $(DLXSROOT)/bin/$(FIRSTLETTERSUBDIR)/$(NAMEPREFIX)/
BINDIR = $(DLXSROOT)/bin/f/findaid/

XMLFILE = $(OBJDIR)$(NAMEPREFIX).xml

# --------------------------------------------------
CONCATDOCTYPE = $(PREPDIR)$(NAMEPREFIX).concat.ead.dcl
SINGLEDOCTYPE = $(PREPDIR)$(NAMEPREFIX).ead2002.dcl
# --------------------------------------------------
XMLDECL = $(DLXSROOT)/misc/sgml/xml.dcl
# --------------------------------------------------
XPATBINDIR = /l/local/bin/
XPATBLD = $(XPATBINDIR)xpatbldu
XPATEXEC = $(XPATBINDIR)xpatu
SGMLRGN = $(XPATBINDIR)sgmlrgn
MULTIRGN = $(XPATBINDIR)multirgn
XMLRGN = $(XPATBINDIR)xmlrgn
# Use OpsnSP 1.5 or higher
OSX = /l/local/bin/osx
OSGMLNORM = /l/local/bin/osgmlnorm

VALIDATEEACHSCRIPT = $(BINDIR)validateeach.sh
FILELIST=$(PREPDIR)list_of_eads  

# --------------------------------------------------
# Set these environment variables so that onsgmls osgmlnorm
# will use XML rules to determin input encoding and output 
# UTF-8

# Enable XML all the time: The multibyte version of OpenSP can 
# operate in a mode in which the internal character set does not
# vary with the document character set, but is always a fixed
# character set, known as the system character set; this mode of
# operation is called fixed character set mode.  
export SP_CHARSET_FIXED=YES
# This specifies the default encoding when operating in fixed
# character set mode. The value must be the name of an available
# encoding. The default encoding cannot be document character set
# relative when operating in fixed character set mode. On input,
# this uses XML's rules to determine the encoding. On output, this
# uses UTF-8.
export SP_ENCODING=XML

## ----------------------------------------------------------------------

##
#  make all convenience method
##
all: prepdocs validate norm validate2 singledd xml post
## ----------------------------------------------------------------------
# to allow using prepdocslist and then the rest of the steps

allbutprep:  validate norm validate2 singledd xml post
## ----------------------------------------------------------------------
#
index:  singledd xml post
## ----------------------------------------------------------------------
### validate each file individually (easier to find errors that way)
validateeach:
        $(VALIDATEEACHSCRIPT)  -d $(DATADIR) -x $(XMLDECL) -t $(SINGLEDOCTYPE) 

### !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
###       Now check .err files in data dir
### !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

### ----------------------------------------------------------------------
### fix up and concatenate all xml docs in $(DATADIR)
prepdocs:
        $(COLLBINDIR)preparedocs.pl -d $(DATADIR) -o $(XMLFILE) -l $(PREPDIR)logfile.txt
### ----------------------------------------------------------------------
### fix up and concatenate all docs specified in $FILELIST
prepdocslist:
        $(COLLBINDIR)preparedocs.pl -i $(FILELIST) -o $(XMLFILE) -l $(PREPDIR)logfile.txt
## ----------------------------------------------------------------------
## validate one last time for luck
validate:
        onsgmls -wxml -w no-explicit-sgml-decl -s -f $(PREPDIR)$(NAMEPREFIX).errors 
                $(XMLDECL) $(CONCATDOCTYPE) $(XMLFILE)
## validate again and write to separate errors file *errors2
validate2:
        onsgmls -wxml -w no-explicit-sgml-decl -s -f $(PREPDIR)$(NAMEPREFIX).errors2 
                 $(XMLDECL) $(CONCATDOCTYPE) $(XMLFILE)
## ----------------------------------------------------------------------

## ----------------------------------------------------------------------
## ensure attribute order matches DTD (required for xmlrgn) and that 
## singletons have the form <foo/> not <foo>
## note the hyphen preceding the osx target.  This tells make to ignore errors f
or just the osx command
## also -E0 flag to osx allows infinite number of errors otherwise on files containing lots of EADs it will stop partway through the filenorm:
        cp $(XMLFILE) $(XMLFILE).prenorm
        $(OSGMLNORM) -f $(PREPDIR)$(NAMEPREFIX).osgmlnorm.errors $(XMLDECL)
        $(CONCATDOCTYPE) $(XMLFILE).prenorm > $(XMLFILE).postnorm
        -$(OSX) -E0 -bUTF-8 -xlower -xempty -xno-nl-in-tag -f $(PREPDIR)$(NAMEPREFIX).osx.errors  
           $(XMLDECL) $(CONCATDOCTYPE) $(XMLFILE).postnorm > $(XMLFILE).postnorm.osx 
        cp $(XMLFILE).postnorm.osx $(XMLFILE)
## ----------------------------------------------------------------------

## ----------------------------------------------------------------------
## have xpat index everything as a single file
singledd:
        cp $(PREPDIR)$(NAMEPREFIX).blank.dd $(IDXDIR)$(NAMEPREFIX).dd
        chmod 664 $(IDXDIR)$(NAMEPREFIX).dd
        $(XPATBLD) -m 256m -D $(IDXDIR)$(NAMEPREFIX).dd
        cp $(IDXDIR)$(NAMEPREFIX).dd $(PREPDIR)$(NAMEPREFIX).presgml.dd
## ----------------------------------------------------------------------

## ----------------------------------------------------------------------
## index the sgml using xmlrgn -- validates and indexes with SGML declaration.
xml:
        cp $(PREPDIR)$(NAMEPREFIX).presgml.dd $(IDXDIR)$(NAMEPREFIX).dd
        $(XMLRGN) -D $(IDXDIR)$(NAMEPREFIX).dd $(XMLDECL) $(CONCATDOCTYPE) $(XMLFILE) 
        cp $(IDXDIR)$(NAMEPREFIX).dd $(PREPDIR)$(NAMEPREFIX).prepost.dd
## ----------------------------------------------------------------------


## ----------------------------------------------------------------------
post:
        cp $(PREPDIR)$(NAMEPREFIX).prepost.dd $(IDXDIR)$(NAMEPREFIX).dd
        $(XPATEXEC) -q $(IDXDIR)$(NAMEPREFIX).dd < $(PREPDIR)$(NAMEPREFIX).extra.srch | 
             $(BINDIR)output.dd.frag.pl $(IDXDIR) > $(PREPDIR)$(NAMEPREFIX).extra.dd
             $(BINDIR)inc.extra.dd.pl $(PREPDIR)$(NAMEPREFIX).extra.dd $(IDXDIR)$(NAMEPREFIX).dd
## ----------------------------------------------------------------------
clean:
        rm -f $(PREPDIR)$(NAMEPREFIX).err*
        rm -f $(PREPDIR)$(NAMEPREFIX).prepost.dd
        rm -f $(PREPDIR)$(NAMEPREFIX).extra.dd
        rm -f $(IDXDIR)$(NAMEPREFIX).dd
        rm -f $(IDXDIR)*.rgn
        rm -f $(IDXDIR)*.idx
        rm -f $(IDXDIR)tmp*
        rm -f $(IDXDIR)*.m*
        rm -f $(IDXDIR)*.t*
        rm -f $(IDXDIR)*.i0
        rm -f $(IDXDIR)*.log
        rm -f $(XMLFILE)*


[[#top|Top]]